Comments on: Ailanthus https://www.wood-database.com/ailanthus/ WOOD Thu, 20 Nov 2025 02:45:18 +0000 hourly 1 https://wordpress.org/?v=6.8.3 By: Taydiggs https://www.wood-database.com/ailanthus/comment-page-1/#comment-33633 Thu, 20 Nov 2025 02:45:18 +0000 http://www.wood-database.com/?p=526#comment-33633 In reply to Brian.

please do not do this, just google hack and squirt. The approved method for removal is called “hack and squirt” see attached: https://extension.psu.edu/tree-of-heaven

]]>
By: Vern https://www.wood-database.com/ailanthus/comment-page-1/#comment-24476 Mon, 13 Jan 2025 01:02:45 +0000 http://www.wood-database.com/?p=526#comment-24476 I harvested some from a freshly cut tree back in 2021 and cut it up for possible future use as turning wood. I encountered no ill medical affects as some have described below. It’s kind of a pretty wood when in pristine condition. My turning stash is covered but some of it got wet anyway. When it gets wet it develops these nasty looking grey streaks. I don’t find it very attractive once that happens. As a result I have turned a few pieces where I did some coloration to hide the grey streaks, Those came out OK. The rest is now either practice wood or headed to the burn pile.

]]>
By: Bill https://www.wood-database.com/ailanthus/comment-page-1/#comment-20783 Sat, 09 Dec 2023 19:01:08 +0000 http://www.wood-database.com/?p=526#comment-20783 In reply to Mark.

I was not aware of the medical connection to this tree when I cut down six 4” Tree of Heaven in my yard with a chainsaw and then chopped all the pieces into 5’ or shorter sections and threw them into the woods. I wore gloves and long sleeves/pants, but I developed heart attack like symptoms over the next 2 weeks that led to a lot of testing over the next 2 months. The doctors could not figure out the cause and it cost me about $12K in out of pocket expense, including a cardio catheterization. The symptoms eventually passed and no heart disease was found. I guess the symptoms from the tree sap passed by the time I completed the testing. It wasn’t until a year later that my wife saw a mention of the connection between the tree of heaven and myocarditis.
I recommend caution in handling any part of this tree. The sap, bark, leaves, and wood dust are connected with severe lung irritation, skin rash, and myocarditis in humans and animals.

]]>
By: Brian https://www.wood-database.com/ailanthus/comment-page-1/#comment-20371 Fri, 29 Sep 2023 21:55:06 +0000 http://www.wood-database.com/?p=526#comment-20371 In reply to Jim Finley.

I have a recipe that kills them easily. You’ll need: diesel and two herbicides “Triclopyr 4” and “Crossroads” Mix 8 oz of tric4 to 4 oz of crossroads to 116 oz of diesel (this ends up as exactly 1 gallon). You can just start with 1 gallon of diesel, add the herbicide then add diesel till it’s a gallon.

Now you take that and soak the tree bark and any exposed roots you can see. Be liberal with it, soak it till it’s running down to the base of the tree. For small trees (6″ diameter or smaller, soak 18-24″ and down. For larger trees, soak higher. The bigger the tree, the higher you go. If it’s massive, give ir a day or three and soak it again.

Don’t do anything else to the tree. Don’t hack it, don’t cut it. Don’t even say anything mean to it. By the time the tree realizes what has happened, it’s too late.

The best time to do this in the late fall through late winter. Like November -Feb.

If you get any resprouts at all, you won’t get man and most of those will die on their own given time. To give you an idea, we treated 50 acres of ailanthus infestation last winter using this method and during the inspection in june, we found like 5 resprouts TOTAL and they were already dying.

]]>
By: Jayde https://www.wood-database.com/ailanthus/comment-page-1/#comment-16533 Sun, 23 Jan 2022 03:14:44 +0000 http://www.wood-database.com/?p=526#comment-16533 The roots of this tree emit an enzyme that inhibits the growth of other plants, further aiding its ability to become invasive. The enzyme appears to be deadly to Spartan Junipers, if my own personal experience is any indication. It is an absolute nightmare to try to get rid of. Even after cutting it down and grinding the stump, you will have suckers that will come up from the old root system. The only reliable way I have found to kill it is Bayer Brush and Weed Killer. Fully concentrated, and painted onto the bark of the tree. It takes a couple of weeks, but it will eventually die.

We had a 64 year old ailanthus altissima in our yard that we cut down. It was roughly 40 feet tall and it overshadowed half of our 75′ x 45′ yard. It was impossible to grow anything other than grape hyacinths near that tree’s roots. I had the arborists leave some of the logs and a cross-section of the trunk with me when they cut down the tree. Wish I had gotten to do more with it. I’m certain I didn’t allow it to air dry properly, given that it was my very first attempt at working with wood, but I noticed that elm seed beetles absolutely loved burrowing under the bark around the logs. They appeared to have utilized that as a place to grow. I also found a specific type of mushroom growing on the dead wood of some of my ailanthus stumps. I don’t know what kind of mushroom it was though.

]]>
By: Jim Finley https://www.wood-database.com/ailanthus/comment-page-1/#comment-16442 Wed, 12 Jan 2022 02:03:16 +0000 http://www.wood-database.com/?p=526#comment-16442 These trees are just about impossible to get rid of – we had a cluster that appeared next to our last house, and we tried to eliminate them three times without success – cut them down to below ground level and dosed them with herbicide, but the following spring, there they were. They grow fast and are nice looking.
At one point they’d gotten taller than the house and the thickest trunk was about 2.5″ in diameter; when I cut them down that time I set aside a piece of that trunk about five feet long to dry.
It’s been four or five years and it’s good and dried, so I just started making it into a cane. Nice looking wood, very light in weight but strong, about the color of pine, no smell now that it’s dry, and pretty easy to work (I did the rough shaping with a band saw and then shaped it with a benchtop belt sander. It’s now ready for hand sanding, staining, and sealing.)

]]>
By: michael ogle https://www.wood-database.com/ailanthus/comment-page-1/#comment-14864 Sat, 14 Aug 2021 18:46:02 +0000 http://www.wood-database.com/?p=526#comment-14864 ailantus has almost no rot resistance. a piece left on the ground will be powder in a year. It is the least rot resistant wood i have ever encountered.

]]>
By: WildFire https://www.wood-database.com/ailanthus/comment-page-1/#comment-13150 Fri, 29 Jan 2021 21:37:40 +0000 http://www.wood-database.com/?p=526#comment-13150 I’ve cut alot of these trees as its usually in the way while clearing land. I’ve never cut any lumber out of it. It’s known around here as a Peanut Butter Tree because it smells like rotten peanut butter when cut. I certainly wouldn’t have it in my shop until the smell dissipated.

]]>
By: Andy https://www.wood-database.com/ailanthus/comment-page-1/#comment-12328 Sun, 22 Nov 2020 15:34:46 +0000 http://www.wood-database.com/?p=526#comment-12328 In reply to Mark.

They’ve made it up to New Hampshire. I cleared some out with a group, and after cutting them down, we either burned or painted herbicide around the stumps.

]]>
By: Alex Smith https://www.wood-database.com/ailanthus/comment-page-1/#comment-8559 Thu, 10 Oct 2019 17:09:09 +0000 http://www.wood-database.com/?p=526#comment-8559 In reply to John.

i agree i work in a wood shop and its a very nice wood to work with.

]]>
By: John https://www.wood-database.com/ailanthus/comment-page-1/#comment-8548 Wed, 09 Oct 2019 19:50:07 +0000 http://www.wood-database.com/?p=526#comment-8548 This tree may be considered to be invasive but the wood itself is quite beautiful and tends to have a nice straight figure since the trees grow straight 99% of the time.

I’ve harvested one of these trees in the past and debarked it and the sap had no ill effects on me. Working the wood had no ill effects on me as well. It’s quite a nice wood to work with in my opinion.

]]>
By: Mark https://www.wood-database.com/ailanthus/comment-page-1/#comment-8512 Thu, 03 Oct 2019 16:09:36 +0000 http://www.wood-database.com/?p=526#comment-8512 In reply to GreenWarrior.

I read of cases where workers who were cutting down these tree ended up with myocarditis (inflammation of the heart muscle) from exposure to the sap. I will say one thing, these trees smell horrible is you crush the leaves. One of the most awful odors ever.

]]>
By: Mark https://www.wood-database.com/ailanthus/comment-page-1/#comment-8511 Thu, 03 Oct 2019 16:03:46 +0000 http://www.wood-database.com/?p=526#comment-8511 SomeLumberjack, I hate to tell you but these trees are very difficult to eradicate. They propagate largely through their extensive root system. If you cut one down, more will pop up in its stead. Another highly invasive tree from Asia, Paper Mullberry, is similar and can quickly colonize an area. I know because they have invaded my property in Southern NJ. I grew up in Phila and the Ailanthus grew everywhere. We used to call them dump trees.

]]>
By: SomeLumberjack https://www.wood-database.com/ailanthus/comment-page-1/#comment-8460 Wed, 25 Sep 2019 13:24:09 +0000 http://www.wood-database.com/?p=526#comment-8460 This tree is very invasive. They support spotted lantern flies, too. I believe that if we cut all of them down, we can avoid the flies from getting past Philadelphia.

]]>
By: GreenWarrior https://www.wood-database.com/ailanthus/comment-page-1/#comment-7831 Tue, 28 May 2019 00:41:45 +0000 http://www.wood-database.com/?p=526#comment-7831 Well, I for one am extremely allergic to the wood. Rashes over my whole body with black scabs under the skin. That was from brief exposure to the sap or juices of the wood when I broke a branch. Not fun… Plus it is toxic to cattle and horses, I’ve heard. but perhaps that’s just the foliage. It’s also a tree that supports many destructive invasive Asian insects and is extremely invasive itself especially along highways and in cities. Plus, when freshly broken it smells very strongly like a skunk. I’m surprised that isn’t mentioned here… That’s the most obvious way to identify it. So I wouldn’t plant it for the wood by any means.

However, if you’ve got it and you’re cutting them down, I could see it being an okay choice for just practicing turning if you’re learning still. It’s very light and somewhat porous and maintains a pungent smell until completely dry.

]]>