{"id":16296,"date":"2015-09-03T00:45:46","date_gmt":"2015-09-03T05:45:46","guid":{"rendered":"http:\/\/www.wood-database.com\/?page_id=16296"},"modified":"2020-12-29T03:41:40","modified_gmt":"2020-12-29T08:41:40","slug":"how-to-turn-a-bandsaw-bowl-from-a-board","status":"publish","type":"page","link":"https:\/\/www.wood-database.com\/wood-articles\/how-to-turn-a-bandsaw-bowl-from-a-board\/","title":{"rendered":"How to Turn a Bandsaw Bowl From a Board"},"content":{"rendered":"\t\t<div data-elementor-type=\"wp-page\" data-elementor-id=\"16296\" class=\"elementor elementor-16296\" data-elementor-post-type=\"page\">\n\t\t\t\t\t\t<section class=\"elementor-section elementor-top-section elementor-element elementor-element-db5b9b9 elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"db5b9b9\" data-element_type=\"section\" data-e-type=\"section\">\n\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-5aa123e\" data-id=\"5aa123e\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-c12b123 elementor-widget elementor-widget-video\" data-id=\"c12b123\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;youtube_url&quot;:&quot;https:\\\/\\\/www.youtube.com\\\/watch?v=brpuYJwQpCk&quot;,&quot;yt_privacy&quot;:&quot;yes&quot;,&quot;video_type&quot;:&quot;youtube&quot;,&quot;controls&quot;:&quot;yes&quot;}\" data-widget_type=\"video.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-wrapper elementor-open-inline\">\n\t\t\t<div class=\"elementor-video\"><\/div>\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<section class=\"elementor-section elementor-top-section elementor-element elementor-element-e31692a elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"e31692a\" data-element_type=\"section\" data-e-type=\"section\">\n\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-50 elementor-top-column elementor-element elementor-element-2bdc0b2\" data-id=\"2bdc0b2\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-a1ccd2d elementor-widget elementor-widget-text-editor\" data-id=\"a1ccd2d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><strong>by Eric Meier<\/strong><\/p><h2>Overview<\/h2><p>Turning a large bowl on a lathe tends to waste a lot of wood. When you factor in the cost of some of the more exotic woods, their price and limited sizes can quickly become prohibitive for larger bowls. With this project, a simple 20\u2033 x 5\u2033 x 1\u2033 piece of wood is cut in half, and then cut into a series of sloped 45 degree rings on a bandsaw, and then glued together to make a handsome 10\u2033 bowl blank to be turned on the lathe.<\/p><p>By using exotic woods and incorporating contrasting wood species, this project offers an extremely high bang-for-the-buck. It is not nearly as labor intensive as other segmented woodturning projects, and it yields very striking and impressive results with minimal materials cost.<\/p><figure id=\"attachment_15287\" aria-describedby=\"caption-attachment-15287\" style=\"width: 400px\" class=\"wp-caption alignleft\"><a href=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/pau-ferro-bowl.jpg\"><img fetchpriority=\"high\" decoding=\"async\" class=\"size-large wp-image-15287\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/pau-ferro-bowl-400x335.jpg\" alt=\"Pau Ferro and Curly Maple (turned)\" width=\"400\" height=\"335\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/pau-ferro-bowl-400x335.jpg 400w, https:\/\/www.wood-database.com\/wp-content\/uploads\/pau-ferro-bowl-200x167.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/pau-ferro-bowl-60x50.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/pau-ferro-bowl.jpg 600w\" sizes=\"(max-width: 400px) 100vw, 400px\" \/><\/a><figcaption id=\"caption-attachment-15287\" class=\"wp-caption-text\">The finished bowl<\/figcaption><\/figure>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t<div class=\"elementor-column elementor-col-50 elementor-top-column elementor-element elementor-element-d67016b\" data-id=\"d67016b\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-52a6384 elementor-widget elementor-widget-text-editor\" data-id=\"52a6384\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h3>Materials\/tools needed<\/h3><ul><li>20\u2033 x 5\u2033 x 1\u2033 board (or two 10\u2033 x 5\u2033 boards)<\/li><li><a href=\"https:\/\/amzn.to\/2JQwY3F\">Trammel<\/a>\u00a0(or other large, makeshift compass)<\/li><li>Wood glue and clamps<\/li><li>Bandsaw<\/li><li>Lathe with bowl jaws<\/li><li>Wood finish<\/li><\/ul><h3>Seen in this video<\/h3><ul><li><a href=\"https:\/\/www.wood-database.com\/pau-ferro\/\">Pau Ferro\u00a0<\/a><\/li><li><a href=\"https:\/\/www.wood-database.com\/curly-maple\/\">Curly Maple<\/a><\/li><li><a href=\"https:\/\/www.amazon.com\/gp\/product\/B0031SUDF0\/ref=as_li_tl?ie=UTF8&amp;camp=1789&amp;creative=390957&amp;creativeASIN=B0031SUDF0&amp;linkCode=as2&amp;tag=thewoodat-20&amp;linkId=WNXJIHRYWD3XEFBH\">1\/4\u2033 bandsaw blade<\/a><\/li><li><a href=\"https:\/\/www.amazon.com\/gp\/product\/B002FL3ZFY\/ref=as_li_tl?ie=UTF8&amp;camp=1789&amp;creative=390957&amp;creativeASIN=B002FL3ZFY&amp;linkCode=as2&amp;tag=thewoodat-20&amp;linkId=HUJRATT6KH6ZYRS6\">Rikon 10-325 Bandsaw<\/a><\/li><li><a href=\"https:\/\/www.harborfreight.com\/3-8-eighth-inch-close-quarters-drill-with-keyless-chuck-95877.html\">Harbor Freight close quarters right angle drill<\/a><\/li><li><a href=\"https:\/\/amzn.to\/36uCmDb\">Oneway Jumbo Jaws<\/a><\/li><\/ul><h3>Other mentions in video<\/h3><ul><li><a href=\"https:\/\/www.wood-database.com\/african-blackwood\/\">African Blackwood<\/a><\/li><li><a href=\"https:\/\/www.wood-database.com\/tigre-caspi\/\">Tiger Caspi<\/a><\/li><li><a href=\"https:\/\/www.wood-database.com\/yellowheart\/\">Yellowheart<\/a><\/li><li><a href=\"https:\/\/www.wood-database.com\/african-padauk\/\">Padauk<\/a><\/li><li><a href=\"https:\/\/amzn.to\/2PJHldc\">Shellac flakes<\/a><\/li><li><a href=\"https:\/\/www.amazon.com\/gp\/product\/B009YNUT6Y\/ref=as_li_tl?ie=UTF8&amp;camp=1789&amp;creative=390957&amp;creativeASIN=B009YNUT6Y&amp;linkCode=as2&amp;tag=thewoodat-20&amp;linkId=K4OVWPVCMOYYKRRH\">Minwax wipe-on poly<\/a><\/li><li><a href=\"https:\/\/www.amazon.com\/gp\/product\/B007VTQFE8\/ref=as_li_tl?ie=UTF8&amp;camp=1789&amp;creative=390957&amp;creativeASIN=B007VTQFE8&amp;linkCode=as2&amp;tag=thewoodat-20&amp;linkId=L2TITVREH7SNEICJ\">Menzerna buffing compound<\/a><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<section class=\"elementor-section elementor-top-section elementor-element elementor-element-4a07e8e elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"4a07e8e\" data-element_type=\"section\" data-e-type=\"section\">\n\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-a136e72\" data-id=\"a136e72\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-083973c elementor-widget elementor-widget-text-editor\" data-id=\"083973c\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<script async src=\"https:\/\/pagead2.googlesyndication.com\/pagead\/js\/adsbygoogle.js\"><\/script>\n<!-- 2019-inline-article-elementor -->\n<ins class=\"adsbygoogle\"\n     style=\"display:block\"\n     data-ad-client=\"ca-pub-3550840598661096\"\n     data-ad-slot=\"6514411072\"\n     data-ad-format=\"auto\"\n     data-full-width-responsive=\"true\"><\/ins>\n<script>\n     (adsbygoogle = window.adsbygoogle || []).push({});\n<\/script>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<section class=\"elementor-section elementor-top-section elementor-element elementor-element-1fcac841 elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"1fcac841\" data-element_type=\"section\" data-e-type=\"section\">\n\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-77cc086c\" data-id=\"77cc086c\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-cc6ea5 elementor-widget elementor-widget-text-editor\" data-id=\"cc6ea5\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\tStart by selecting the appropriate sized stock based on the desired diameter of the finished bowl. The board used should be\u00a0at least <em><strong>half as wide and twice as long<\/strong> <\/em>as the finished bowl diameter. So, for the 10&#8243; diameter bowl in this example, the board was 5&#8243; wide (half the width of the bowl) and 20&#8243; long (twice the width of the bowl).\n\n<figure id=\"attachment_16324\" aria-describedby=\"caption-attachment-16324\" style=\"width: 700px\" class=\"wp-caption aligncenter\"><img decoding=\"async\" class=\"size-full wp-image-16324\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl01-cutting.jpg\" alt=\"This 20\" width=\"700\" height=\"525\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl01-cutting.jpg 700w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl01-cutting-200x150.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl01-cutting-60x45.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl01-cutting-400x300.jpg 400w\" sizes=\"(max-width: 700px) 100vw, 700px\" \/><figcaption id=\"caption-attachment-16324\" class=\"wp-caption-text\">This 20&#8243; long Pau Ferro board will be cut at 10&#8243; to form the two halves of the bowl blank.<\/figcaption><\/figure>\n\nThese two halves should roughly form a square when placed side by side. For a 10&#8243; diameter bowl, the blanks should be 10&#8243; long x 5&#8243; wide, forming a 10&#8243; square.\n\nFor this example, a 1\/4&#8243; thick piece of <a href=\"https:\/\/www.wood-database.com\/curly-maple\/\">Curly Maple<\/a> was glued on top of the <a href=\"https:\/\/www.wood-database.com\/pau-ferro\/\">Pau Ferro<\/a>. (This creates a nice contrast in the finished bowl.) This made each bowl blank half 10&#8243; long, 5&#8243; wide, and 1&#8243; thick.\n\nThe thickness of the board will determine the spacing of the rings and also the number of layers required to build up the height of the bowl. 1&#8243; thick seems ideal, though thicknesses greater or less than this could be used as well. Unless you are planning on making a very small bowl, it&#8217;s not recommended to go below 5\/8&#8243; or 3\/4&#8243; thickness.\n\n<figure id=\"attachment_16325\" aria-describedby=\"caption-attachment-16325\" style=\"width: 700px\" class=\"wp-caption aligncenter\"><img decoding=\"async\" class=\"size-full wp-image-16325\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl02-measuring.jpg\" alt=\"To determine the ring spacing, measure the total width of the bowl blank. (1\" width=\"700\" height=\"525\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl02-measuring.jpg 700w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl02-measuring-200x150.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl02-measuring-60x45.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl02-measuring-400x300.jpg 400w\" sizes=\"(max-width: 700px) 100vw, 700px\" \/><figcaption id=\"caption-attachment-16325\" class=\"wp-caption-text\">To determine the ring spacing, measure the thickness of the board. (In this case, it&#8217;s 1&#8243;.)<\/figcaption><\/figure>\n\nTo lay out the lines where the blank will be band-sawed, begin with a <a href=\"https:\/\/www.amazon.com\/gp\/product\/B000MHP94I\/ref=as_li_tl?ie=UTF8&amp;camp=1789&amp;creative=390957&amp;creativeASIN=B000MHP94I&amp;linkCode=as2&amp;tag=thewoodat-20&amp;linkId=3KUWE7EDAZPL5DH5\">trammel<\/a> or some other circle-drawing jig. Lay the boards side by side so they form a square, and use the center point of the two boards to anchor your trammel or compass. Then adjust your tool to draw the largest possible circle that extends to the very edges of the blanks.\n\n<figure id=\"attachment_16326\" aria-describedby=\"caption-attachment-16326\" style=\"width: 700px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-16326\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl03-trammel.jpg\" alt=\"Begin laying out the rings by drawing the largest possible circle and work inward.\" width=\"700\" height=\"525\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl03-trammel.jpg 700w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl03-trammel-200x150.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl03-trammel-60x45.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl03-trammel-400x300.jpg 400w\" sizes=\"(max-width: 700px) 100vw, 700px\" \/><figcaption id=\"caption-attachment-16326\" class=\"wp-caption-text\">Begin laying out the rings by drawing the largest possible circle and work inward.<\/figcaption><\/figure>\n\nBesides the thickness measurement in the previous step, there&#8217;s no further measuring or calculations involved in laying out the cut lines. Using the outer circle drawn on the board halves, measure inward the same distance as the thickness of the board (in this case, it was 1&#8243;).\n\nContinue to draw successively smaller and smaller circles, measuring in the same distance (equal to the board thickness) each time. Stop when the innermost circle is the desired base size. Be careful not to create too small of a base, as the circles drawn\u00a0are for the top of the layer, and will taper down at a 45 degree angle. So what appears to be a 4&#8243; base in this example (on top of the layer) will actually end up being only 2&#8243; at the bottom of the layer once the angled cuts are made.\n\n<figure id=\"attachment_16327\" aria-describedby=\"caption-attachment-16327\" style=\"width: 700px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-16327\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl04-compass.jpg\" alt=\"The compass can be used to draw the smaller inner cut lines.\" width=\"700\" height=\"525\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl04-compass.jpg 700w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl04-compass-200x150.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl04-compass-60x45.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl04-compass-400x300.jpg 400w\" sizes=\"(max-width: 700px) 100vw, 700px\" \/><figcaption id=\"caption-attachment-16327\" class=\"wp-caption-text\">A\u00a0compass can be used to draw the smaller inner cut lines.<\/figcaption><\/figure>\n\nSet the bandsaw table to 45 degrees. Given the steep angle and low position of the table bed, it might be easiest to make these cuts sitting on a shop chair or bench.\n\nBandsaw blade width is very important: 1\/2&#8243; to 3\/4&#8243; wide resaw blades (or even 3\/8&#8243; wide general blades) will not be able to make the tight-radius cuts that are required for the innermost circles. No relief cuts can be made, and the blade must be able to make one continuous cut through the entire radius. Make sure to check the cutting radius for your blade and use the right width for your project. In this case, a <a href=\"https:\/\/www.amazon.com\/gp\/product\/B0031SUDF0\/ref=as_li_tl?ie=UTF8&amp;camp=1789&amp;creative=390957&amp;creativeASIN=B0031SUDF0&amp;linkCode=as2&amp;tag=thewoodat-20&amp;linkId=WNXJIHRYWD3XEFBH\">1\/4&#8243; wide blade<\/a> was used.\n\nCut each half of the bowl blank slowly and carefully. Precision, and not speed, is most important. Once you&#8217;ve cut each ring out, glue each half to its mating part individually with regular wood glue.\n\n<figure id=\"attachment_16328\" aria-describedby=\"caption-attachment-16328\" style=\"width: 700px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-16328\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl05-bandsaw.jpg\" alt=\"Cut along the circular lines, being careful not to deviate on the left or right very far.\" width=\"700\" height=\"525\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl05-bandsaw.jpg 700w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl05-bandsaw-200x150.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl05-bandsaw-60x45.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl05-bandsaw-400x300.jpg 400w\" sizes=\"(max-width: 700px) 100vw, 700px\" \/><figcaption id=\"caption-attachment-16328\" class=\"wp-caption-text\">Cut along the circular lines, being careful not to deviate on the left or right very far.<\/figcaption><\/figure>\n\nOnce the halves have been cut and glued together, it&#8217;s time to stack them up and glue the layers together. This is where the magic happens!\n\nYou may choose to glue all the layers together into one solid bowl blank all at once. But for this project, each layer was glued on and built up one at a time and turned and smoothed out on the lathe before the next layer was added.\n\nAlso note that the initial board thickness determines the wall thickness of the bowl blank. If you&#8217;ve elected to use thinner stock, you will have much less wiggle room to shape the bowl, and the walls will be a more or less straight 45 degree angle. However, with these 1&#8243; thick walls, there will be ample room to add a bit of an artistic shaping\u00a0to the edges of the bowl and give it a more concave profile.\n\n<figure id=\"attachment_16330\" aria-describedby=\"caption-attachment-16330\" style=\"width: 700px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-16330\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl07-stacking.jpg\" alt=\"Stack each layer up successively to go from flat board to 3D bowl in seconds.\" width=\"700\" height=\"525\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl07-stacking.jpg 700w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl07-stacking-200x150.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl07-stacking-60x45.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl07-stacking-400x300.jpg 400w\" sizes=\"(max-width: 700px) 100vw, 700px\" \/><figcaption id=\"caption-attachment-16330\" class=\"wp-caption-text\">Stack each layer up successively to go from flat board to 3D bowl in seconds.<\/figcaption><\/figure>\n\nThe bowl base was glued to a waste block, which was then mounted to the lathe. Once all the walls were flat and smooth, and all the layers were glued on, the bowl could be given its final shape.\n\nAfter shaping and sanding, the bowl will be reversed using bowl jaws and the bottom finished.\n\n<figure id=\"attachment_16331\" aria-describedby=\"caption-attachment-16331\" style=\"width: 700px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-16331\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl08-layering.jpg\" alt=\"In this project, the layers were built up and glued on right on the lathe.\" width=\"700\" height=\"525\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl08-layering.jpg 700w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl08-layering-200x150.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl08-layering-60x45.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl08-layering-400x300.jpg 400w\" sizes=\"(max-width: 700px) 100vw, 700px\" \/><figcaption id=\"caption-attachment-16331\" class=\"wp-caption-text\">In this project, the layers were built up and glued on right on the lathe.<\/figcaption><\/figure>\n\nBowl jaws are very useful for holding large objects like bowls. In the absence of these, you could simply part off the bowl from the waste block and sand the base flat and smooth by hand (or with a palm sander).\n\n<figure id=\"attachment_16332\" aria-describedby=\"caption-attachment-16332\" style=\"width: 700px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-16332\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl09-bottom.jpg\" alt=\"After finishing the bottom of the bowl, all that's left is applying the finish.\" width=\"700\" height=\"525\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl09-bottom.jpg 700w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl09-bottom-200x150.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl09-bottom-60x45.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl09-bottom-400x300.jpg 400w\" sizes=\"(max-width: 700px) 100vw, 700px\" \/><figcaption id=\"caption-attachment-16332\" class=\"wp-caption-text\">After finishing the bottom of the bowl, all that&#8217;s left is applying the finish.<\/figcaption><\/figure>\n\nBecause Pau Ferro can be <a href=\"https:\/\/www.wood-database.com\/wood-articles\/finishing-exotic-tropical-hardwoods\/\">troublesome to finish with oil-based reactive finishes<\/a>, it&#8217;s been my standard procedure with most of my projects to apply a few seal coats of <a href=\"https:\/\/www.woodcraft.com\/AffiliateWiz\/aw.aspx?B=2679&amp;A=106&amp;Task=Click&amp;TargetURL=https:\/\/www.woodcraft.com\/product\/158346\/brooklyn-tool-and-craft-shellac-flakes-blonde-12-lb.aspx\">shellac<\/a>. These coats dry in seconds (or minutes for subsequent coats) and do a great job of prepping the project for the final topcoat.\n\n<figure id=\"attachment_16333\" aria-describedby=\"caption-attachment-16333\" style=\"width: 700px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-16333\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl10-finishing.jpg\" alt=\"For this bowl, I used a few seal coats of shop-made shellac, followed by a wiping varnish.\" width=\"700\" height=\"525\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl10-finishing.jpg 700w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl10-finishing-200x150.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl10-finishing-60x45.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl10-finishing-400x300.jpg 400w\" sizes=\"(max-width: 700px) 100vw, 700px\" \/><figcaption id=\"caption-attachment-16333\" class=\"wp-caption-text\">For this bowl, I used a few seal coats of shop-made shellac, followed by a wiping varnish.<\/figcaption><\/figure>\n\nTaking a page from <a href=\"https:\/\/www.tahoeturner.com\/\">Malcom Tibbets&#8217;<\/a> playbook, I always like to sign the bottom of most of my turned projects with my initials, date, and woods used. (If you ever want to learn more about segmented woodturning, <a href=\"https:\/\/www.amazon.com\/gp\/product\/0941936864\/ref=as_li_tl?ie=UTF8&amp;camp=1789&amp;creative=390957&amp;creativeASIN=0941936864&amp;linkCode=as2&amp;tag=thewoodat-20&amp;linkId=4T3M4PVV5UNC3I2P\">Malcom&#8217;s book<\/a> is a fantastic resource written by an incredibly creative\u00a0turner!)\n\nI try to sign this between coats. I don&#8217;t like to sign the raw wood because the ink can seep into the wood and smudge, and I don&#8217;t like to sign above the <a href=\"https:\/\/www.amazon.com\/gp\/product\/B009YNUT6Y\/ref=as_li_tl?ie=UTF8&amp;camp=1789&amp;creative=390957&amp;creativeASIN=B009YNUT6Y&amp;linkCode=as2&amp;tag=thewoodat-20&amp;linkId=K4OVWPVCMOYYKRRH\">top coat<\/a> because it&#8217;s too easy for the ink to wear and rub off. I like to imbed the ink just beneath the last few layers of finish.\n\n<figure id=\"attachment_16334\" aria-describedby=\"caption-attachment-16334\" style=\"width: 700px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-16334\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl11-signing.jpg\" alt=\"It's been my habit to sign the bottom of my turnings with my initials, date, and woods used.\" width=\"700\" height=\"525\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl11-signing.jpg 700w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl11-signing-200x150.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl11-signing-60x45.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl11-signing-400x300.jpg 400w\" sizes=\"(max-width: 700px) 100vw, 700px\" \/><figcaption id=\"caption-attachment-16334\" class=\"wp-caption-text\">It&#8217;s been my habit to sign the bottom of my turnings with my initials, date, and woods used.<\/figcaption><\/figure>\n\nOne of the most overlooked and underrated phases of any project is the finishing step. <a href=\"https:\/\/www.wood-database.com\/wood-articles\/wood-finishes-works\/\">Different finishes work well at different times<\/a> with different projects, but with exotic woods like these, I feel it&#8217;s always worth the extra effort to do a candy-like gloss finish. Even a satin finish could benefit from a little extra TLC by being rubbed out with <a href=\"https:\/\/www.amazon.com\/gp\/product\/B001JYVDSE\/ref=as_li_tl?ie=UTF8&amp;camp=1789&amp;creative=390957&amp;creativeASIN=B001JYVDSE&amp;linkCode=as2&amp;tag=thewoodat-20&amp;linkId=SHSITIZWLKIMJV3N\">0000 steel wool<\/a>.\n\nBasically, no gloss finish will be perfect right off the rag (or brush, sprayer, etc.). Dust and other contaminants will always get into the finish, and surface irregularities will always be present. By lightly sanding the surface with high grit sandpaper (anywhere from 400 up to 2000), surface unevenness is eliminated and you are left with a perfectly smooth (though dull) finish. By using a buffing wheel with <a href=\"https:\/\/www.amazon.com\/gp\/product\/B007VTQFE8\/ref=as_li_tl?ie=UTF8&amp;camp=1789&amp;creative=390957&amp;creativeASIN=B007VTQFE8&amp;linkCode=as2&amp;tag=thewoodat-20&amp;linkId=L2TITVREH7SNEICJ\">polishing compound<\/a> as the final step, an automotive-like sheen develops.\n\n<figure id=\"attachment_16335\" aria-describedby=\"caption-attachment-16335\" style=\"width: 700px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-16335\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl12-buffed.jpg\" alt=\"Once the finish is lightly sanded and buffed up to a high gloss, the beauty of the wood comes to life.\" width=\"700\" height=\"525\" srcset=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl12-buffed.jpg 700w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl12-buffed-200x150.jpg 200w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl12-buffed-60x45.jpg 60w, https:\/\/www.wood-database.com\/wp-content\/uploads\/bowl12-buffed-400x300.jpg 400w\" sizes=\"(max-width: 700px) 100vw, 700px\" \/><figcaption id=\"caption-attachment-16335\" class=\"wp-caption-text\">Once the finish is lightly sanded and buffed up to a high gloss, the beauty of the wood comes to life.<\/figcaption><\/figure>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<section class=\"elementor-section elementor-top-section elementor-element elementor-element-a54ff40 elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"a54ff40\" data-element_type=\"section\" data-e-type=\"section\">\n\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-0f78fab\" data-id=\"0f78fab\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-45f06bd elementor-widget elementor-widget-text-editor\" data-id=\"45f06bd\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<script async src=\"https:\/\/pagead2.googlesyndication.com\/pagead\/js\/adsbygoogle.js\"><\/script>\n<!-- 2019-inline-article-elementor -->\n<ins class=\"adsbygoogle\"\n     style=\"display:block\"\n     data-ad-client=\"ca-pub-3550840598661096\"\n     data-ad-slot=\"6514411072\"\n     data-ad-format=\"auto\"\n     data-full-width-responsive=\"true\"><\/ins>\n<script>\n     (adsbygoogle = window.adsbygoogle || []).push({});\n<\/script>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<section class=\"elementor-section elementor-top-section elementor-element elementor-element-e86b201 elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"e86b201\" data-element_type=\"section\" data-e-type=\"section\">\n\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-f1819aa\" data-id=\"f1819aa\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-3958457 elementor-widget elementor-widget-text-editor\" data-id=\"3958457\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Are you an aspiring wood nerd?<\/h2>\n<a href=\"https:\/\/www.wood-database.com\/worldwide-woods\/\"><img loading=\"lazy\" decoding=\"async\" class=\"alignleft size-full wp-image-20844\" src=\"https:\/\/www.wood-database.com\/wp-content\/uploads\/Janka-lank.jpg\" alt=\"\" width=\"225\" height=\"330\" \/><\/a>The poster,\u00a0<strong><a href=\"https:\/\/www.wood-database.com\/worldwide-woods\/\">Worldwide Woods, Ranked by Hardness,<\/a><\/strong>\u00a0should be required reading for anyone enrolled in the school of wood nerdery. I have amassed over 500 wood species on a single poster, arranged into eight major geographic regions, with each wood sorted and ranked according to its Janka hardness. Each wood has been meticulously documented and photographed, listed with its Janka hardness value (in lb<sub>f<\/sub>) and geographic and global hardness rankings. Consider this: the venerable Red Oak (Quercus rubra) sits at only #33 in North America and #278 worldwide for hardness! Aspiring wood nerds be advised: your syllabus may be calling for\u00a0<a href=\"https:\/\/www.wood-database.com\/worldwide-woods\/\"><em>Worldwide Woods<\/em><\/a>\u00a0as part of your next assignment!\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"<p>https:\/\/www.youtube.com\/watch?v=brpuYJwQpCk by Eric Meier Overview Turning a large bowl on a lathe tends to waste a lot of wood. When you factor in the cost of some of the more exotic woods, their price and limited sizes can quickly become prohibitive for larger bowls. With this project, a simple 20? x 5? x 1? piece [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":9,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-16296","page","type-page","status-publish","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.wood-database.com\/wp-json\/wp\/v2\/pages\/16296","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.wood-database.com\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.wood-database.com\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.wood-database.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wood-database.com\/wp-json\/wp\/v2\/comments?post=16296"}],"version-history":[{"count":6,"href":"https:\/\/www.wood-database.com\/wp-json\/wp\/v2\/pages\/16296\/revisions"}],"predecessor-version":[{"id":26889,"href":"https:\/\/www.wood-database.com\/wp-json\/wp\/v2\/pages\/16296\/revisions\/26889"}],"up":[{"embeddable":true,"href":"https:\/\/www.wood-database.com\/wp-json\/wp\/v2\/pages\/9"}],"wp:attachment":[{"href":"https:\/\/www.wood-database.com\/wp-json\/wp\/v2\/media?parent=16296"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}